Shed & Log Cabin Assembly

As a company we don’t offer fitting on our sheds, summer houses or log cabins. Good news, we do have a recommended list of self employed installers who can carry out the installation for you – Some also offer additional services such as bases & more.
All guarantees remain when using one of our ‘Highly Recommended’ installers.


Alan Storey
T: 07729 107419
E: [email protected]


Independent Installations
T: 01282 415510
E: [email protected]


Trevor Miller
T: 07860 539098
E: [email protected]


Lukasz Niziurski
T: 07429 852717
E: [email protected]


Not Available

If you wish, we can arrange for one of our recommended professional installers to contact you. We only require some additional information in the contact form below, and we’ll handle the rest.

Please enter your name , (or if applicable) any company name, establishment, or organisation.
Please enter your telephone number.
Please enter your email adress.
Please enter the postcode where they'll be installing your building.
Location : Is your address easy to find using a Sat-Nav?(Required)
Please bear in mind that new properties may not be listed yet, and rural areas may have a large area covered by the same postcode. Please let us know (at the end of the check-list) if we require special directions.
Parking : Can we park close to the installation site without charges?(Required)
Can the fitter get a vehicle close to your site. Permits must be issued where appropriate, and metered parking will be chargeable. Additional charges may be levied if your site is an excessive distance from the closest parking area.
Access : Is there clear access without any height restrictions?(Required)
Buildings come in lots of sizes, most will fit through an average doorway. Please check that terraced houses, gateways, archways, and any other restrictions aren't going to be a problem. Assembly teams won't take parts over fences, walls, up steep slopes, through houses, or carry them excessive distances without prior arrangement. If available, this service may incur an additional charge, and the fitters wouldn't be liable for any accidental damage that may occur.
Obstacles : Is the site clear of plants, shrubs, trees and debris?(Required)
You may need to cut back overhanging tree branches to leave enough headroom to accommodate the building.
Clearance : Is there enough space around the building to allow fitting and maintenance?(Required)
In most cases, fitters require a minimum of 2ft (60cm) on all sides to assemble your building correctly, however they may be able to manage with less. Please let us know if any sides have less than this.
If you've answered NO to any of the previous questions, or if there are any other possible issues, then please let us know below. Please note that this an automated form, therefore DON'T ASK US ANY SPECIFIC QUESTIONS HERE, instead you should email us at [email protected].
Product : What type of building have you ordered or interested in?(Required)
Base Type : What sort of base is your building going on?(Required)
A suitable flat, firm, level base is essential, and must be ready before the assembly team arrives (unless we are providing a base for you of course). Concrete, paving slabs, and decking are suitable for most buildings (inc. wood, plastic, metal etc.). Plastic grids, timber frame or battens are really only suitable for wooden sheds or summerhouses.

Please let us know if there are any dates/times that are unsuitable or that a fitter cannot reach you during the next few days.
Contact : How would you like the fitter to contact you?(Required)
When you have many questions, is it sometimes easier to contact you via phone rather than email?
For security please enter the code exactly.